What problems should be paid attention to when using stretch film?

1. Minimize the appearance of wrinkles at both ends of the stretch film and the red compressed lines in the middle, which will seriously affect the aesthetics.

2. The stretch film cannot be long on one side and short on the other side. The standard for blanking on both sides is about 1 cm. The paper tubes must be aligned.


3. It will cause the customer to use the stretch film and it will break when it is pulled. When packing, pay attention to maintaining the edge not to collide, which will cause the edge to crack and cause quality problems. As long as there is a little crack, this is also a rare customer feedback The problem must not have burrs.




4. If the cut is neat and uneven, it cannot be shipped as a waste product, including when making the goods, the two ends must be rolled neatly, and the edge material should be cut neatly, not more here and less.


5. The die head should be washed clean, no black impurities, and no burnt plastic can fall into it. If it can be found by the naked eye, it must be removed immediately.


Stretch film can be used for combined (clustered) packaging and outer packaging of irregularly shaped articles or commodities. It can not only meet the functions of moisture-proof, dust-proof, touch-proof, transparent display, etc., but also increase the attractiveness of the product's appearance. It can also be used to replace all kinds of cartons.